German Rack 27U G8-61027B Single Front Curve Perforate Door

Product Features and Specification German Rack 27U G8-61027B (60x100x139)

Single Front Curve Perforate Door

Product overview : German Rack 27U G8-61027B (60x100x139)

• Manufactured to the standard of ANSI/EIA-310D-1992 (Rev.EIA-310C), IEC60297-1, IEC60297-2, BS5954 Part 2, DIN 41494.
• Modular Knock Down in order to be delivered conveniently.
• Produced from Electro-Galvanize Sheet Steel with thickness of 1.5 mm.
• Mounting Pole, Frame Structure and Base made of 2.0 mm. Electro-galvanize Sheet Steel. Castor Base stand made of 3.0 mm. steel, 100% rust proof protection.
• Mounting Pole were designed to be C-shape Angle in order to increase the strength. Punching of square mounting hole 7.0 x 7.0 mm. on both flange. They can be adjusted in/out freely to meet customer's needs. Has some number which obviously put it on the mounting pole position.
• Front Door is the steel frame with Acrylic 5.0 mm. thickness and the width of acrylic is 38 cm. (the height is being influenced by the size of the rack)
• Door edge is bore with gray dust rubber seal (3 fins). Security locks with 19" Germany Master Key.
• Rear Door is the steel door with 34 x 23 cm. ventilation slot at the bottomfollow standard IP 4X Inside the rear door has the T-frame 70 mm. width mounted to strong the door from swinging. Door Edge is also bore with Gray dust rubber seal (3 fins) with 19" Germany Master Key which is the same set as the front door.
• Hinges is 19" Germany Export Rack products made of 3 pieces of high strength PVC, rusty and without any interfering noise. Reversibility Front and
• Rear Door by adjusting at one screw nut of hinge.
• Side Panels are steel with two handles of 19" Germany Slide Latch on the top part in order to easily removable, Security lock with 19" Germany Master Key.
• Roof Cover can be mounted with various type of Single, Dual and Triple
• Fans and can also be changed to Vented Raised Roof Cover in option.
• Base has the same width and deep of cabinet to fully supportive to all the weight. The bottom is three parts Plinth with slide shutter for cable entry and gray sponge to protect any tree-passing by animals, any kind of fan can be equipped there as well.
• Pedestal was equipped with the castor base and is adjustable; by all of the 4 Pedestal's base made of black ABS and can be freely adjustable 180 degree to suit the slope and protect all effects from static and earth leakage.
• Castor made of back Nylon Six with the diameter of 50 mm; equipped on the 360 degree swivel that allow to be moving conveniently with capacity the static load 100 Kg/castor.
• New Shine Light Gray Two-Tone color by ElectroStatic Powder Coating paint
• Grounding with color stripe green and yellow copper wire 2.5 mm.; connecting between all removable part of Rack
• Screw Set compose of Screws, Captive nuts, plastic Washer; by each were coated with nickel and M6 thread system.
• Load rating 500 Kg.
• Manufacturing and Distribution by TIS/ISO 9001:2000 Company.